Monday's Update.

I'm back in the shop starting TODAY.  YAAY!

And that's today's WOODTALKIN. See you soon. 

Dick 👍👍

720-350-2992

Post Surgery Update

Hi,
Welcome to WoodTalkin.

Here's a fun little Limerick that explains what's going on for me and the shop right now: 

"Patience is a virtue. Possess it if you can. Seldom found in women, but never found in man."

 The first week in September I had surgery on my left thumb. It  repaired a painful bone-on-bone joint. Then I awkwardly worked through the fall completing customer's projects right up until Thanksgiving.  The 1st week in December I had the same surgery performed on my right thumb--my dominant hand. Now,  with both hands at less then 60%, just tying my shoes has become a whole lot harder!

I haven't been able to get back in the shop to get things going again---yet.  But I'm evaluating my progress week-to-week and daily.... impatiently.  Don't hesitate to call me! I can come to your home,  do estimates, and we can discuss costs and options for the projects you might want me to tackle. I'll put your project on the jobs board and into the work que. Then we'll be ready to go as soon as I get the anticipated double Thumbs Up. Yaay👍👍.

Thanks for your patience!

Dick Brandow

-350-2992

A Hand Carved Hickory High Chair

Check out this little high chair.   It's completely handmade--hand carved out of Hickory branches! It is a really fun story,  and it's a fun story to re-tell.

As you may know already,  the business name,  WoodTalkin, was chosen because of the stories pieces, like this little chair's, whisper to us. And they deserve to be listened to.  So bend your ear this direction for just a minute.

 My customer brought this little chair in the door and described how it had been in his family for several generations.  He didn't know who originally fabricated it--perhaps a great grandfather. The issue for them at this particular point in time--the reason he brought it to the shop--was because it was really rickety, unsafe for a child to sit in.  So he asked me to make it safe again.

 Well, as you may know, literally everything I do in the shop boils down to time and materials for work done. And this little chair was going to be a project requiring complete disassembly in order to clean and re-glue all the joints.  That appeared initially an easy enough task to accomplish, and in a reasonable amount of time.  Well so much for 1st blush conclusions.  When I began the task to disconnect the joints and pull the chair apart, I realized all the joints had been pinned with tiny nails. Ugh!

These were "wire nails"--production made.  People began using wire nails--slowly graduating from the use of blacksmith-made steel nails--in the late 1800s. Then they gradually replaced hand made steel nails in the United States and Great Britain.

 I had to carefully locate the nailhead(s) in each joint, dig that little nail head out of its position--enough so that at least I could grab it and pull it out--and then move to the next joint.  And I soon discovered some of the joints had several  embedded nails. So,  I needed to get back on the phone with my customer to let him know how and why  this effort was going to take longer and cost more than any of us had anticipated.  (Ongoing customer collaboration is key to good customer relationships!)

 Having to dig all these little details out of these joints left some nasty scars on the chair (look closely). Each of these little holes then had to be filled and then re-stained to match the surrounding patina, or blend it to compliment it.

 When I was able to start pulling the joints apart, I concluded this wasn't the 1st time these little joints had been re-glued. The glue in these joints was not in every case the old glue one would expect to find in a chair made in the late 1880s.  Some of the joints  appeared to have the old glue, but others were sporting glue contemporary of the past 35 or 40 years. Hmmm. So the chair's joints were probably  "pinned" together in a previous re-glue effort. In fact, the finish  was also unmistakably contemporary. This sweet hand-made highchair had been re-glued and and refinished at some point in the comparatively recent past.

 One of the handmade spindles fitting into the yoke of the seat's back was badly deteriorated. With antiques I don't re-make a spindle and put it in place with the old ones. So,  I removed the spindle from the yoke and cut off the portion that was damaged beyond repair. I placed a new piece of Hickory into the spindle,  glued and shaped it to accommodate both the figure and fit, and reintroduced it into this beautiful hand-carved yoke medly .  Then it was time to re-glue all the pieces and the chair back together. Wow, fun stuff!  

Such a fun little piece.  My customer was happy.  This little beauty is going back home to grand kids. I'm happy!

That's WoodTalkin for today. Thanks for listening. Merry Christmas!

Dick

A Sendipitous Acquisition!

This little vanity desk is just one piece of a bedroom suite.
Hi Everyone! In a past several months, I had the privilege to refinish all the suite's pieces except a headboard and a footboard. My customer reported how he acquired the pieces from a distant family member who initially purchased them second-hand, used them for a while, and then gave them to him.




attractive little vanity desk

I was first introduced to these in my customer's garage--each waiting for some needed attention. I could see he had some keepers (click here)! It was clear to me these were good quality pieces of furniture, but that's a kind of observation my customers can't necessarily  make. They don't get to see the variety in styles and construction I routinely work with in the WoodTalkin shop. So, it was my privilege to help him make some observations about each item, and those ramped up his appreciation for what he had serendipitously acquired.

nasty stain

A two-drawer bedside table (with a nasty stain in the top), a dresser, a vanity chair, and a small desk chair. For the most part all of these pieces were in reasonably good condition, considering their age. They had no structural problems, warps, or veneer losses. The bedside table had a broken toe on a back leg and the vanity had a similar toe insult. All the pieces were original finish, except the vanity. It had been painted white, so trying to get all the paint out of the vanity, replacing the veneer on the side table's top, and fabricating two new toes were probably the biggest challenges.

refabricated ear

My customer planned to self-replace the upholstered back on the vanity's chair. So, my goal with that piece was to support her effort. I refinished the chair and replaced its broken right "ear" (see pic, right) on the back of the chair so she could expertly upholster up to and around it.  

So, here are a few pics of the finished items--all happily ready to go home.


front to back: vanity chair, desk chair, and bedside table



seven-drawer dresser



The pieces are finished in a Matt luster and in a stain chosen by my customer. As mentioned above, they plan to reupholster the vanity's chair and also the seat cover on the desk chair. 

pretty little vanity and a new toe

The vanity has really pretty original antique brass pulls--but they are not shown in this pic. (I forgot to get that pic.) If you look really carefully you can see the back left foot of the vanity--it's no longer missing. So, there you go, a really fun project that reinvigorates this little bedroom suite for another generation. (Don't you wish we could all do that for one another!)

That's Wood Talkin for today. Furniture has a story to tell--so let's pay attention. Call me or text me for free in-home estimates, trouble-shooting, or some fun discussion.

Dick Brandow

720-3450-2992 cell/text

 

 



 

A Return from Ebony

Here's a fun one. As it turned out this little beauty didn't present any huge challenges. But it did offer at least a fun surprise. What you see is the way it looked the first time my customer contacted me. They texted me this pic, below. It's a darkly refinished White Oak Sideboard, probably @1910. He purchased it several years ago from an antique dealer. I suspect the dealer refinished the piece adding several contemporary touches, including the ebony patina and some hardware well outside the sensibilities of its historical character.

A natural wood look is more in keeping with my customer's present tastes, so that discussion and its mental picture guided the restoration effort. Considering the wear and tear of years, my customers also wanted what would have been the period hardware replaced on the piece. Some period brasses that were still on the piece offered us the direction we needed in purchasing replica replacement pieces, so that's what we did.


Below you see the finished product. Is that fun or what!

And as I suggested above, there were no huge surprises with this effort. However, there was this one fun little caveat.


During the restoration process the mirror was removed and stored away to permit the removal and restoration of the mirror frame. As I pulled the screw fasteners and removed the mirror I observed that a screw was missing from the hole on the back left (non-facing) side of the mirror frame. Hmmm. The question of it's removal, and for what reason, became abundantly clear later, when I replaced the mirror back into the refinished frame and then re-mounted the frame to the back of the sideboard.

Do you see those little shelves on either side of the mirror?

Those little shelves are largely supported by a single screw that extends from the back of the mirror frame and into each little shelf. When the screw from the back side of the mirror is placed appropriately to support the shelf on the left (facing side) of the mirror, the shelf tilts slightly and awkwardly up! Why? Because when the hole was initially drilled at the factory, 100 years ago, the installer--having his own BAD DAY--drilled the hole slightly high--too high for the shelf to be level with the mirror! Is that cool or what. I think that's kinda fun. We all do that stuff...it's a human sort of thing. I've provided a bigger and a little more frontal pic of the sideboard too, so you can see it as it was in the shop before the final work was completed. You can see the left shelf, yup, it's just a tad high. I think it's a feel-good observation that reminds us we're all family members of the larger human condition. So, let's cut ourselves & each other just a little slack.


That's Wood Talkin for today. Hope you have a fun week too.


Dick









 

Ebony Over Red Oak with Reveals

Hi Everybody...This was a lot of work....and a lot of fun! 

My customer asked me to take a look at an oak bedroom suite he had acquired a decade and one-half ago--nine separate pieces. He explained how he was tired of the Red Oak motif and that he wanted to change it out for something darker. I looked at it and we discussed a couple alternatives. But because I know a finished sample is often helpful to visualize how the outcome might look, I suggested I could take a drawer, finish it, and return it for his consideration.

And that's what we did.



His oak set is indeed beautiful and very well made (i.e., Oak Interiors, www.fineoak.com). His pieces' corners, trim, and floor plates were punctuated with beautiful carvings--all of which would be covered up--muted--if I just stained these pieces black. So, I suggested that we "reveal" the carvings so that instead of muting them they were actually highlighted. And that's another reason why I thought it might

Hope Chest

be important--even necessary in this case--for him to see a sample  to whet his visual appetite. So I finished the face of a drawer that included some carvings and took it back to him a few days later. He really liked it. I recognized a fresh enthusiasm about what this effort might promise. So, we were off and running--or sort of.

Footboard

Those of you who may have been to my shop know I don't have room for a nine-piece bedroom suite. So, this effort became something of a game of "furniture tag," getting and finishing a couple pieces at a time, then carefully delivering them back and taking a few more back to the shop. Similarly, you've got to know that a dresser, for example, is not just "a dresser." In this case it was twelve drawer fronts, twelve drawer

Armoire Top

boxes, and a large structural box frame--26 separate pieces taking up space in the shop. Then, too, there were virtually stacks of brass hardware to be catalogued and stored during the finishing for each piece! The work took a

Armoire Base

little over a month--and all nine pieces were happily delivered home. See how the reveals turned out? You're not seeing all the pieces, but I think you can get the idea. Yes, there were a few surprises along the way, but all-in-all the project ended with happiness on both ends: I was happily able to make him happy... and his bedroom suite is black and beautiful!! Check out the pics of some of his pieces and let me know what you think.

That's Wood Talkin for today....are you listening?

Dick

French Provincial Styled Antique Writing Desk

Here's a really memorable repair.

My customer brought this fantastic hand-made French Provincial styled writing desk to the shop. Her family history goes back at least four generations in the Denver area. In this case we're talking about a gentleman who owned a store in lower downtown Denver in the 1860-1880 time frame. Cool stuff. This was his desk!


It belongs to my customer now...a great, great granddaughter? She explained how that when she occasionally needed to move it, the back left leg complained a lot, then...it fell off. That's memorable in and of itself, but upon close inspection of the broken area it was obvious to me that the top bulbus flare of the leg had long been the tasty dinner for some now long gone worms. Many years ago they had eaten themselves out of the wood and disappeared "into the night." (see pic below)

This beautiful piece is the handiwork of a fine craftsman similarly swallowed up into that long night. But his workmanship still sings loud and clear in the glory of this beautiful piece. So, in a response to the challenge he has introduced, and for my customer's sake--to repair his work and to save this beautiful desk--the question at hand is about what to do now?

I began the project pragmatically. I carefully removed the entire leg from the desk. Then, I carefully cut away the spongy portion of the worm eaten bulb from that leg. The picture (left below) shows this spongy cut-out. Below, I'm holding it in front of (juxtaposed on) the newly finished leg so you can see where it fit.
Freeing the leg from the desk offered me a lot more flexibility. I was able to utilize several machines in the shop, and it enhanced the gluing, clamping, and final finishing processes.







 I carefully fabricated a new piece from raw Ash wood stock and glued it into the original leg. I also had to fabricate the hip portion, as a separate piece in this case. (It had apparently dropped off and was lost from the leg years ago as the worms did their tunneling throughout the upper portion of that leg...see pic below.)

With these processes complete, the last challenge was to securely replace the leg back into the desk's frame and supporting structures.

 




So, is this a beauty or what?! I've offered a few pics just to savor the lines and the patina of this special piece.



This is Wood Talkin for today. Wood talks---how often do you listen?


                                                           Dick